Liquiduct

Liquiduct
Mod	Thermal Expansion
Type	Pipe
Durability	N/A
Renewable	?
Stackable	?

A conduit which will transfer liquid from one place to another. The speed of the transfer varies depending on the liquid's viscosity and how full the pipe is (a fully pressurized pipe moves liquid faster).

Wrench Mechanic

A Crescent Hammer can be used to join adjacent Liquiducts. By default, a newly placed Liquiduct will not connect to another Liquiduct with a liquid already inside. To make the connection, simply wrench the appropriate face of either conduit at the junction - a connection will only be made on that side. Alternatively, using a wrench on a Liquiduct which is adjacent to something that liquid can be drained from will convert the Liquiduct to extraction mode. In this mode, simply provide the Liquiduct with a redstone signal and it will extract liquid from adjacent blocks.

Dismantle Mechanic

If dismantled (Sneak + Activate) with a wrench or a crescent hammer, the Liquiduct will instantly be removed.

Connection Behaviour

Liquiducts can connect to a Railcraft Iron Tank valve, but only if the valve is placed on the second layer of the tank wall.

Capacity

Liquid	Capacity per duct	Maximum Throughput	Notes
Water	500 mB	100 mB/tick
Lava		80 mB/tick
Steam	800 mb	160 mB/tick	This is 160 steam/tick
Biomass	500 mB	100 mB/tick
Biofuel	500 mB	100 mB/tick

Capacity can be measured with a multimeter, divide by the length of the liquiduct to get the per-duct value. Maximum throughput can be measured when the liquiduct is full.